← All Logsheets
Engineered Enclosure System (EES)
Daily Inspection Log
NYC BC §3309.10 · DOB §3309-01 · PE-Approved Drawings Required On-Site
PL-008
Project Address
General Contractor DOB Job No.
SSM Name SSM License No.
Date Time of Inspection
EES Permit No. Permit Expiration Date
Approved Drawing No. EES Location / Floors Covered
Installation Compliance — BC §3309.10YESNON/A
1EES erected per DOB-approved plans — all field conditions match approved drawings with no unauthorized deviations
2EES positioned at or below the lowest active work level and all perimeter openings
3EES provides continuous coverage of all exposed building faces — no openings at corners, setbacks, or wall penetrations
4Current, legible approved drawings immediately available on site for DOB inspection
Netting Condition — DOB §3309-01YESNON/A
5All netting panels in good condition — no tears, cuts, abrasion, or UV degradation
6Netting fastened at all anchorage points in conformance with approved installation drawings
7All attachment hardware (wire, ties, or clips) intact and placed at the intervals specified on approved drawings
8Gap between EES face and building facade does not exceed 1 inch (25 mm)
9Vertical face of EES covered by minimum two (2) layers of netting
Structural IntegrityYESNON/A
10All supporting members, cantilevered frames, and bracket connections structurally sound — no excessive deflection or active corrosion
11EES face is plumb and aligned — free of sag, outward bow, or tilt
12Any debris, ice, or standing water removed from netting surfaces
13Condition of EES verified and any damage remediated after each inclement weather occurrence
Controlled Access Zone (CAZ) — DOB §3309-01YESNON/A
14CAZ properly established for all adjoining properties — barricades, signage, and barriers in place
15CAZ configuration matches approved EES drawings — no unauthorized changes
16EES inspected on all active faces — not limited to primary street frontage only
17All field repairs or system modifications reviewed and sealed by PE of record before work is performed
Deficiencies & Corrective Actions
Inspected By (print)Title / License #
SignatureDate & Time
SSM Review (print)SSM License No.
SSM SignatureDate